Table of Contents
Mehr zu diesem Produkt auf sievers-group.com

SWMS Load Carrier Card

This page shows the properties of a single selected Load Carrier. In the SNCL Load Carrier Inventory Items section, you can also view the inventory items associated with the Load Carrier.

Reports

  • SU label
  • PTU label
  • SSCC label: This action will print the corresponding label depending on the Load Carrier type (SSCC or GS1-SSCC). If a shipping label service provider is connected, the shipping label will be printed.

Actions

  • Create Load Carrier:
  • Dislocate Load Carrier: Creates a Outbound Stock Post for this Load Carrier. Any picking serial number is also removed in the process.
  • Post Shipment:
  • Create shipping order line: Transfers the Load Carrier data to a new shipping order line. The prerequisite for this is that a shipping order already exists and the Load Carrier has the state 7-packed.
  • Reuse Load Carrier: This action will reset the Load Carriers following values:
    • Load carrier type (will be SU afterwards)
    • Warehouse shipment number
    • Comment text for label
    • Packaging number
    • SSCC (packaging)
    • Packaging process number
    • Loading process no.
    • Picking document
    • No. Label
    • Storage place
    • Status is set to 2-Recorded
    • Description is set to Reused Usage of the action will be entered in the time protocol. This function can only be executed if the linked warehouse shipment has already been posted.

General

  • Code: Unique identification code of this load carrier. This number can be used to assign specific load carriers to shipments. For example, it can always be traced which load carriers are on which trucks. Synonym: Load carrier number
  • Regular Barcode: Shows the barcode including check digit
  • Load Carrier Type: You can no longer change the load carrier type once the state of the Load Carrier is 9-finished
  • Load Carrier State: The current state of the load carrier
  • Load Carrier Origin: Specifies in which subprocess of the SIEVERS WMS this load carrier was created.
  • Description
  • Inventory Measure Code
  • Depth, width, height
  • Volume
  • Number of Inventories Load Carrier: Indicates the number of inventory items per Load Carrier. For serial number managed item stocks, 1pc = 1 serial number = 1 inventory.
  • Number of Pieces Load Carrier: Indicates the number of pieces in inventory
  • BUM (Base Unit of Measure)
  • Gross Weight Load Carrier
  • Net Weight Load Carrier
  • Warehouse Receipt No.
  • Warehouse Shipment No.: This field is filled when a PTU or SSCC is created in picking, packing or warehouse receipt. This gives the Load Carrier a reference to an order. This means that it must also have a reference to a warehouse shipment. The corresponding warehouse shipment number is displayed in this field. This shows which Load Carriers belong to a warehouse shipment and must be loaded. If this number is not filled, but inventory items are still assigned, the Load Carrier has already been assigned to an order in the warehouse receipt.
  • Picking Series: Shows the picking series number, if one is assigned.
  • MOP Batch No.: Is filled as soon as a PTU is created with Create container or with blanco barcode within a picking document with the type MOP Batch - Picking.
  • Comment text label
  • Consolidation No.
  • Packaging No. for SSCC
  • SSCC (Packaging): Displays the associated SSCC for packaging
  • Packaging No.
  • Shipment Process No.
  • Blocking Code: If something is entered here, the Reusable indicator is automatically deactivated. If you delete the blocking code, Reusable is updated based on the inventory measure code. Changes to the block code immediately affect all associated move job lines.
  • Blocked
  • Return-storage support open: Indicates whether a return-storage operation from the Return-Storage Support (A4.4) is still pending for this load carrier. Set to Yes when the A4.4 screen is exited before the return-storage process is completed. Reset to No once the return-storage is successfully performed.
  • Ret. Storage Support Inv.: Contains the inventory number of the affected inventory when a return-storage operation is pending. Cleared once the return-storage is completed.
  • Consolidation number: If the container is part of a MOP batch, this field is only filled once a picking document line is assigned to the container
  • Packaging No. for SSCC
  • Carrier label printed: This field can be used to determine whether the load carrier label has already been printed. This prevents the same label from being attached to two different load carriers.
  • Quantity Label printed: Shows the number of printed load carrier labels or shipping labels
  • Shipping Order No.
  • Reusable
  • Chg. Load Carrier Type allowed: May only be set if Reusable is activated. Allows the Load Carrier type to be changed.
Hinweis

The units of measure and weight are defined via the Unit conversion list and basic unit list.

Stock

Specifies the current and future location and the storage strategy of the Load Carrier.

  • Location Code
  • Warehouse Code
  • Storage Shelf Code
  • Space Code
  • Storage Place Type
  • Route Optimization
  • Inbound Stock Post Strategy Code: Specifies a Inbound Stock Post strategy for this Load Carrier. This field is automatically filled from the lines of the load carriers of the associated warehouse shipment. You can change the Inbound Stock Post strategy for this individual Load Carrier here if you want.
  • New location Code
  • New Warehouse Code
  • New Storage Shelf Code
  • New Storage Place Code
  • New Space Code
  • New Storage Place Type
  • New Route Optimization

SWMS Load Carrier Inventory

This subpage shows the inventory items for this Load Carrier. In addition, existing sales orders, Assembly Header orders, production orders and transfer orders for the respective line can be displayed using the functions.

About Functions:

  • Show Sales Headers
  • Show Assembly Headers
  • Show Production Orders
  • Show Transfer Orders

You can use these functions to display the corresponding orders for the selected line.

Table

  • No.
  • Item no.
  • Item description
  • Number of Pieces
  • Storage Place Code
  • Location code
  • Assigned Source No.: This number refers to the assigned order if no associated warehouse shipment exists. This can happen if the load carrier is already assigned to an order in warehouse receipt.
  • Special order sales number: This number points to the assigned special order if no associated warehouse shipment exists. This can happen if the load carrier has already been assigned to a special order in the warehouse receipt.
  • Source No.: This number belongs to the assigned order if the Load Carrier belongs to a warehouse shipment.
  • Reserve. Number of Units

You can add these fields via personalize:

  • Lot no.
  • Sell-by date
  • Serial no.
  • Variant

Load Carrier Change Log

The Change Log records changes to a Load Carrier and enables complete traceability of the Load Carrier history. For each logged change, the old and new values as well as the date, time and user are recorded.

The following fields are logged:

  • Inventory Measure Code
  • Height, Width, Depth
  • Weight
  • Blocking Code
  • Shipment Process No.
  • Load Carrier Type
  • State
  • Comment Text for Label
  • Warehouse Shipment No.
  • Outbound Stock Post No.
  • Warehouse Receipt No.
  • Packaging No.
  • Reusable
  • Picking Series
  • Consolidation No.
  • MOP Batch No.
  • Origin
  • Carrier Label Printed

In addition, the actions Reuse Load Carrier and Restore Load Carrier are recorded as entries.