Floor Conveyor Vehicles
You can use this table to manage your floor conveyor vehicles (FCV). It has the following columns:
- Code
- Description
- Storage Location: Location Code where the FCV is moving.
- Storage place location: Here a storage place is stored that enables the locating of load carriers when they are moved. If a load carrier is located on this storage place, it is positioned on the floor conveyor vehicle. A storage place is mandatory in order to select the FCV on the MDE on page A8.
- Level filter: Use this filter to define which levels can be reached by the FCVs
- Maximum weight: Specifies the maximum weight that the FCV can carry
- Warehouse filter: The FCV should move in these warehouses
- MOP vehicle: Activate this option if this material handling equipment is used for multi-order picking. When activated, at least one entry must be created in the sub-table MOP box
- Number of MOP boxes: Displays the number of entered MOP boxes. Click on the number to edit the MOP boxes
- MOP info storage place: Here the storage place of a MOP material handling equipment can be saved when it is completely parked in A4.MOP.
MOP Boxes
For material handling equipment marked as MOP vehicle, you can define multiple storage places as boxes in the sub-table MOP boxes. Each box receives a box code for visual identification during picking.
The box code is attached to the container or on flexible box cards in a highly visible manner. This makes it easier for the picker to assign items to the correct order containers.
- Storage place code: Associated storage place for the respective box. A storage place code must not be repeated in different MOP boxes. The uniqueness is checked by the system
- Box Code: Short identification of the container or the box card (e.g. 01, 02, 03, A1, B2). The box number is displayed on the mobile data terminal during picking and serves for visual assignment
Hinweis
Select the last two topology elements of the storage place code according to the box number. This significantly facilitates data maintenance. Example: Storage place "MOP-VEHICLE-01" → box number "01". Each storage place can only be assigned to one box. A storage place must not be repeated in different material handling equipment. The box number (e.g. 01, 02, 03) only achieves uniqueness with the storage place and can be repeated in different MOP carts. A box number is unique per material handling equipment. No box may be assigned multiple times on a rack.